eSIMCircle Arrivals
Airport transfer

How to get from the airport to Perth

Perth's airport is close to the city, and the rail link makes the trip short. The detail that catches people out is the terminal: Perth's terminals are spread out, and your flight's terminal changes how you start.

Published · Updated · 3 min read · By eSIMCircle Editorial

Sydney Opera House steps and Harbour Bridge pano, Australia
Sydney Opera House steps and Harbour Bridge pano, Australia. Photo: Erik W. Lyon, CC BY-SA 4.0, via Wikimedia Commons.

Which terminal?

Perth Airport (PER) has several terminals that are not all next to each other. International flights and some domestic airlines use different ones. Check your booking for the terminal before you land; a terminal transfer can add time before you reach the station or a pickup point.

Options into the city

OptionRough time to the CBDRough cost before publication
TrainAbout 18 to 25 minutesAround A$5 to A$6
Taxi or rideshareAbout 20 to 30 minutesAround A$35 to A$50

These are planning figures. Fares change, so check Transperth and current taxi rates before you travel.

Whitehaven Beach, Whitsunday Island, Queensland, Australia
Whitehaven Beach, Whitsunday Island, Queensland, Australia. Photo: Slug69, CC BY-SA 2.0, via Wikimedia Commons.

Taking the train

The train is usually the cheapest way into the city and avoids road traffic at busy times. Check where the nearest station is to your terminal and how you will pay. Have your accommodation's nearest station saved, since many hotels are a short walk or a bus ride from it.

When a car makes more sense

A taxi or rideshare is often the simpler choice if you are three or four people, have bulky luggage, or are staying outside the CBD, for example in Fremantle or near the beaches. Split between a group, the cost difference shrinks.

Heads-upLate arrivals: check the last train time before you fly. Rideshare pickups use designated zones; follow the signs.
Fitzroy Island, Australia
Fitzroy Island, Australia. Photo: Joshua Tagicakibau, CC BY-SA 4.0, via Wikimedia Commons.

Get your phone online

After a long flight into Western Australia, the first thing you need is a working phone. If your Australia eSIM is installed, switch mobile data to it and turn on roaming for that line before you leave the terminal. Keep roaming off on your home SIM.

Check that your map loads and send an arrival message to your accommodation if you are arriving late.

First-hour checklist

  • Terminal confirmed and route to the station or pickup zone known.
  • Accommodation address saved offline.
  • eSIM on, map tested.
  • Payment method ready for the train or the car.

Before you board

Compare current Australia eSIM plans before you fly to Perth.

View Australia plans

Mobile data gets used steadily on a trip like this, between maps, transport, photos and messages. On the Australia plan list, prices start at 1.89 USD for Australia eSIM 500MB/Day, and every plan can be topped up with more data or extended with more days while it is active. Install the eSIM at home on stable Wi-Fi, count arrival and departure days in the validity window, and switch it on after you land.

Quick answers

Is there a train from Perth Airport to the city?
Yes. The rail link takes about 18 to 25 minutes to the CBD. Check your terminal's nearest station.
Why does the terminal matter at Perth Airport?
The terminals are spread out, so a transfer between them can add time before you reach the train or pickup point.
Is a taxi or rideshare better for groups?
Often, yes. Split between three or four people, the cost difference with the train shrinks.

Onward reading